Head : Andy Garver
Mark_D2 : English
Vlademier_A20 : Russian
Miro_B31 :Bulgarian

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tire Killer Barriers
#1
Hydraulic Tyre Killers
Model: HTK001
GS hydraulic tyre killers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high security applications, hydraulic tyre killer are one of the most secure systems. Even though the attack is from high tonnage vehicles with high speeds, it's not possible for the vehicle to keep on moving because of the damage given to wheels and the rim of the vehicle. Drive unit is hydraulic, but in case of power failure tyre killer can be lowered or lifted manually with the help of manual hand pump. With the help of PLC controller, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint etc, radio control, on/off key switch etc. Besides, safety accessories like photocells, inductive loop detectors, flashing lights or red/green traffic lights can be integrated to the system very easily.

HYDRAULIC TYRE KILLER GENERAL FEATURES
GS hydraulic tyre killers which electrohydraulically operated, is completed with hydraulic pump in outside cabinet and a control switch; GS hydraulic tyre killer is an effective way to stop even wider vehicles than cars. When closed, tyre killer is totally hidden in the street surface, so it allows the drive to all vehicles; when raised, it can stop even great trucks at a speed of 80Km/h. It is typically used for perimeter protection of military bases, embassys, government buildings, airports and some other important public service places, in car parking and a san anti-terrorist measure.

HYDRAULIC TYRE KILLER CONTROL CABINET
IP65 protection is available in the cabinet 1.2 mm thick galvanized sheet metal is utilized in the body. It is painted electrostatically with RAL 7032 emboss point.

HYDRAULIC TYRE KILLER CONTROL SYSTEM
Control electronics utilized in hydraulic tyre killer is PLC controlled. Motor is driven by a contactor and protected by a thermic breaker. The low current voltage required by the system is supplied by a switch mode power supply. There is a fuse for every component in the system. All the cables running in the system are colour coded and numbered to ease tracking. There is a control keyboard in the power group as well as the desk-top one for the guard room. Time delay automatic-raising of the hydraulic tyre killer can be adjusted between any time period. Power requirement of the hydraulic tyre killer is 380 V 50~60Hz (or 220 V 50~60Hz, optional).

HYDRAULIC TYRE KILLER CONSTRUCTION AND DRIVE UNIT
Main mechanical elements forming the construction are heavy duty 12mm top plate and the frame consisting of 80x60x3 mm box, 100*50 mm NPU and 100 mm NPI beams. This sophisticated mechanical design enables the tyre killer to withstand 60 tons of axle loads, besides, in case of crash, linkage bars transmit the impact directly to the foundation, therefore help to protect mechanism. A cushioned cylinder powers the road blocker up as it pivots on multi-sealed bearings. All the parts are hot dip galvanized/3 layers primary coated and 3 layers painted to yellow and black, in order to prevent rusting.

HYDRAULIC TYRE KILLER DATASHEETS
ItemsSpecs
Application rangeIntersection safe protection in main area
MaterialGalvanized sheet steel/A3 steel
Surface treatmentPaint with reflective stripe
IPIP67
Standard colorBlack and yellow
Length2m-3m-4m-5m-6m Greater Length On Request
Distance between Blocking Spikes200mm
Blocking Spikes Thickness10mm
Pit Dimension Length 2mH600*1030*2224mm
Width580mm
Height from ground70~110mm
Min weight capacity40T
Blade height150mm
MovementHydraulic
Working environment-40℃~+70℃
Control modeShort range wireless remote control/drive-by-wire
Remote Control distance≤30M
Up/Down speed2s
Emergency Manual LoweringYes
Connection Line to control Unit10m (Max Length. 30m)
Voltage220V - 50/60Hz
HYDRAULIC TYRE KILLER ACCESSORIES (OPTIONAL)
Flashing or red/green traffic lights
Remote control receiver, transmitter
Safety photocell, stand and casing
Inductive loop detector
Drainage pump
Card reader system
Hydraulic accumulator
HYDRAULIC TYRE KILLER LAYOUT

HYDRAULIC TYRE KILLER INSTALLATION IMAGESTire Killer Barriers
website:http://www.barrierbollard.com/tire-killers/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)